Parts by Type

print This page

End Yokes

Filters: CENTERLINE TO END = 3.000, BRAND = PTI,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
3104-10 1310 10 1.125 1.552 1.500 3.000 BS Dana 44 LD PTI
3104-01 1310 23 1.031 1.552 1.500 3.000 BS Dana 28 Slinger 41498 LD PTI
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3504-243 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3104-03 1310 26 1.146 1.552 1.500 3.000 BS Dana 30, 44, 50 LD PTI
3304-01 1330 26 1.146 1.552 1.500 3.000 BS Dana 44 LD PTI
3504-06 1350 26 1.146 1.552 1.500 3.000 BS Dana 44 3-70-28X STRAP LD PTI
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3104-262CV 1310 26 1.146 1.614 1.500 3.000 CV DODGE/JEEP FRONT TC CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve LD PTI
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
3104-264 1310 26 1.146 1.453 1.469 3.000 BS 0 Midship end yoke used on multiple applications. LD PTI
3104-261CV 1310 26 1.146 1.453 1.500 3.000 CV 0 CV style midship end yoke used to bolt up a open socket style CV head to a center section. LD PTI
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3504-01 1350 29 1.276 1.875 1.500 3.000 BS Dana 60, 70 LD PTI
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3504-293 1350 29 1.276 1.875 1.500 3.000 UB Dana 44, 60, 70 takes 3-94-18X u-bolt kit, 1.900 clearance for nut, forged LD PTI
3504-292 1350 29 1.263 1.875 1.500 3.000 UB Mopar 8.75, 9.25 takes 3-94-18X u-bolt kit, 1.650" clearance for nut, forged LD PTI